It is not difficult to buy decor items to create a unique atmosphere of warmth and comfort of your apartment. But the original highlight add hand-made products. Recently, increasingly, modern people are returning to the origins of needlework.
A special place is occupied by wicker products. They are made from pre-harvested wood vines. This process is long and painstaking, requiring certain skills. Alternatively, they came up with an easier and more interesting method. In the process of weaving do not use branches, and tubes from newspapers.
We learn how to make paper blanks
The first step is to find the right material. Sheets of plain paper may be suitable for these purposes, though due to the density it is difficult to make products from it. Therefore, we will use newspapers, which will need a lot. Office knife, cut the newspaper into strips of 10 centimeters, no more. For comfortable weaving, the stripes are made long. More handicrafts can be viewed here.
With the help of knitting needles, tightly twist the strip into a tube. It is possible that the thickness of the edges will be different. To keep the newspaper tube in shape, moisten its edges and fix it. Thus you need to twist about 50 newspaper tubes. The final quantity is determined by the complexity and size of the finished product.
Before you get to work, you should decide on painting the material. Decide whether you will paint the tubes or the craft itself. It must be remembered about the importance of choosing the right varnish. Since, if you do not cover the finished crafts, it will lose shape and will not have a presentable look. The most acceptable option is to use acrylic lacquer.
Learn to weave the bottom of crafts
The shape of the bottom is square, round and rectangular. For the experiment, take a glass with a continuous bottom. We will need two circles cut out of thick paper, on the first circle we mark the place where the stands will be mounted. Read: Mosquito net. Features
The interval between the racks, making wide. If an oblique weaving method is used, a small number of racks are allowed. After gluing the ends of the tubes to the marks on the first lap, we cover them with the second. A square base is made in a similar way. But the wicker bottom looks more effective.
Learning to build up tubules
Since the height of the vase, usually exceeds the length of the tube, they must be increased. If you are doing everything right problems with the connection should arise. Since the rolled-up newspaper tubes at the edges have a different thickness, this makes the connection less noticeable. Insert the thin edge of the tube into a thick and gently twist. After painting the finished crafts joint will not be visible.
There are three ways of weaving: simple, complex and linear.
With a simple method, the stick is attached to the prepared base not far from the stand. You can use any jar, glass or bottle for the braiding. Then we direct the stands to the top, fix them with a clothespin and weave them in tubes.
With a complicated method, in the process of weaving, two tubes are used, which are located opposite the base to the base, alternately bending around each stand on both sides. This technique of execution looks very elegant.
The most interesting method of linear weaving oblique or spiral. Perfectly suited for the manufacture of vases, with this method, the rack intertwined with each other with a small deviation.
To learn the technique of weaving tubes from newspapers, you should pay attention to simple products (coasters, candy vases and so on). Over time, having mastered all the basics you will be able to weave more complex objects, combining a pleasant pastime with the benefits for home improvement.
Weaving newspaper tubes for beginners 100 photos of finished products
- Cleaning Services What is their advantage?
- Front door and garage door
- Metal tile. Dignity.
- LANDSCAPE DESIGN: decoration of the dacha
- Plumbing inspection hatch
- Mosquito net. Features
- Sliding aluminum windows
- Book furniture
- Solid wood tables