Every regular reader of DachaDecor.ru will be able to build a hill for young summer residents with their own hands, because we have repeatedly been engaged in construction at the dacha, and successfully completed many even more complex projects!
Requirements for the construction of a children's slide
At first glance, this is a very simple construction that can be done literally in a day. But if you take it more seriously, then it is worth considering the basic requirements of such structures.
The main requirement, which bypasses the cost and other parameters. Safety is the most important thing here, because our children, whom we love a lot, will go down the hill, and therefore there should not be a single chance to suffer at all.
We also recommend to read: Cottage laddersSimple alpine slides in the country with their own hands (10 photos) Hut in the country with their own handsBaby pool
Safety is determined by many parameters, but it is very important that the slide be stable, durable and withstand the weight of several children at once. It should be fixed on the base or mounted on poles hammered into the ground, provided with protection, high-quality fixings for each individual material, and also ensure safety during descent. Here you need to pay attention to the evenness of the gutter, eliminate all bolts, sharp corners, barbs on metal and wood, so that the kids do not scratch and tear their clothes, as well as providing a "soft" landing, for example, on a lawn with thick grass, in a sandbox or even on special mats under the slide.
Also, you need to provide a safe climb. Good ladder with handrails and additional protection, small height, reliability and stability of the slide.
These parameters are already included in the security, but separately they should be given time.
Each connection is strong, from new and reliable fasteners. Mandatory installation slides and its fixation. Perhaps it will be homemade piles, and maybe a simple foundation, where fastenings for the whole structure will be placed in a concrete cushion under the slide. This is what will ensure the stability of the structure, and its reliability will be guaranteed by your serious approach to assembly and the selection of quality materials for the creation.
A children's slide is installed in a place with a good view so that children who have fun there will always be supervised. Most often, it is built on the playground, but may be a separate structure, outside the complex.
It should be a slightly elevated place, warm and sunny, perhaps not far from the garden, from which, at certain hours, there will be a scattered shadow.
You should not install the building next to the household yard, garage for cars and other buildings, which may be dangerous for kids things and tools.
Construction of a children's slide
Materials for different types of designs will be useful different. You can always take a standard tool, ensuring practicality and an increase in the speed of work with a quality power tool, which we described earlier.
Such constructions have been known to us for many years, and they are built according to the classical plan, which includes the base, the ladder, the descent of the slide, the protective part and the upper platform. Quite often, the structure also has additional elements for games and entertainment - internal labyrinths, a sandbox at the bottom of the slide, small rooms under the base of the slide and others.
It is possible to build such a structure rather quickly, you only need to choose high-quality material for it. Attention should be paid to the quality of wood, which should be dry and polished. The base can be built from timber, the upper platform and the descent limiters can be made from boards, as well as steps.
Especially worth working on the descent. Here you can buy a tree ready for installation, because home processing is not always so high quality to ensure safety. But if there is a grinder at the dacha, then you can always work on improving the wood yourself.
To assemble the product, you need to choose a reliable fastener - bolts, nuts and washers, but the lowering guides should be fixed with glue or back fastening so that there are no nails, screws and bolts on the sliding plane.
There are few structural differences from a wooden structure, only the tree is changed to metal. If anyone remembers, metal slides used to stand in every yard and, interestingly, could serve for decades with normal care.
The first thing that is being built is the foundation, which is necessarily fixed on a simple foundation. It is possible that 4 vertical installation pipes are simply poured in, much the same way as when installing fence poles.
Further, on one side, the staircase at an angle and a railing are welded onto two pipes. On the opposite two pipes - the descent. On all four pipes above - the platform. The whole structure is tied with metal protection - rings made of pipes or a rod, high railings, etc.
It is important to note what kind of design will be the descent of a children's slide. Most often, these are two pipes with a certain bend, which descend down from the upper platform and rest against the ground. The chute is a sheet of metal welded to these two pipes. It's very simple, but you need to initially determine the loads on the whole hill and its descent, and based on these data, select the material for construction.
When assembling a children's structure, it is important to take into account the quality of welding and the mandatory grinding of all welds and other joints. This process is performed by the grinder.
Further, the hill is painted, and the descent is well polished. It is highly desirable that it consists of a single piece of sheet metal, without seams.
Today there is an opportunity to reduce the duration of the process and labor costs, as the market offers us some components for children's slides.
Naturally, it is possible and not to think about the construction of such structures at all, but to look for them in stores or in the network, where to buy a modern structure. But if you decide to build your own country in the country, then you can think only about some of the most complex components.
Wooden children's slide do it yourself (video)
From our own experience, we know that the most difficult part of the structure at the dacha is the descent, or rather, the chute for descent. It should be steady, strong, safe. And, if the strength is not a problem to ask him, even with the same additional fastenings, then it is not so easy to make the gutter smooth and slippery.
Therefore, we recommend to pay attention to plastic slopes. They come in different sizes and fit any type of construction. What is good is that plastic slopes have many advantages: they are immediately ready for installation, are rather strong, do not deteriorate from exposure to moisture and other atmospheric phenomena, and are ready to serve in their original condition for more than ten years.
Children's slide is a good solution for a playground in the country, and therefore we recommend you to think about installing a similar one on your land plot. Do not forget that we are always happy to hear your ideas about the articles on the site, and therefore we offer to express your opinion in the comments. Material about plastic orphanages for summer cottage will also be interesting.