Why it is worth choosing appearance of an entrance door, but not appearance of garage gate? Associated colors and the same pattern create the impression of harmony and order on the facade. In new homes this is the standard. If you want to buy a set consisting of an entrance door and a garage door, first select the gate, because the number of ways to finish them, patterns and colors is less. Manufacturers have prepared different versions of gates and doors that match each other. Manufacturers of entrance doors also have models with ribs on the market, for example, at the gate. Usually it is steel or aluminum doors. The easiest choice The decision that a smooth door and a smooth door painted in RAL color will be installed in your home. If you choose white or brown, you will pay the least. Each gate manufacturer offers dozens of the most popular colors in regular sales, so they are cheaper. Many of them also have a suitable door. If you want to use products of a different color, you can choose from more than 200 RAL colors on which you can paint the door and the gate. They must be made to order. Stamping in the garage doors and entrance doors Garage doors have a steel sheet covering that can be flat or differently shaped. In the swing gates it is usually a trapezoid sheet with a T-shaped ribbed pattern and a vertical pattern. The segments have horizontal panels about 50 cm wide, which may have additional narrower horizontal ribs. There are already swinging gates with horizontal ribs, the same as in sectional ones. At the gates of folding and sectional gates, there are also chests' drawings, that is, consisting of several repetitive embosses in the shape of a convex rectangle or square. Among the entrance doors you will find those with ribbed horizontal stripes, like a sectional door or chests. Sheet metal used in the door sheath may have a different surface structure: smooth, microprofiled or imitating the structure of wood or other materials (wood, wood, nacre, silk, etc.). Structured sheets are not used by door manufacturers. Few door manufacturers have steel structures made of sheet metal with a sand structure, such as decoheining. Veneers for doors and gates When you buy a door and gate from the same manufacturer, you can choose models covered with fashionable veneers, most often under a tree. They will perfectly fit. Foil for gates and doors produced by many companies. They often have projects with the same name on sale. But currently popular walnut, mahogany or golden oak from manufacturer X look different from manufacturer Y. Sometimes these differences may be minimal. However, if you want to make such a choice, it is best to check not only the verbal name, but also the digital brand and the veneer manufacturer. Then you will be sure that the pattern and color of the veneer will be the same. It is worth paying attention to a small detail. The veneer on the door is arranged so that the pattern is vertical. In the garage door - on the contrary - the figure is horizontal. Pens and transom Garages cannot be attached to the garage door. Usually there is only an emergency opening handle. It may have the same color as the front door, but not in shape, because these are completely different collections of equipment. It is difficult to find the same lantern for gates and doors. This element is rarely used in garage doors. Wooden doors Few manufacturers of garage doors offer segmented or folding wood doors. They are most often painted with azure to expose the structure of the tree and grain. However, they do not have entrance doors, only technical. Attempting to pick up the door, bought them in another company or ordered from a carpenter, may fail. Wooden doors from https://www.vinchelli.ru/catalog/derevyannye-vkhodnye-dveri/ are painted either in azure or veneered. You can order a door from the same tree, it will be more difficult to paint it. If you have not received information about the type of glaze used by the gate manufacturer, it will be available in our market.
