Apron for the kitchen of MDF - an inexpensive, practical and aesthetic solution.
The operational life of the product is lower than its counterparts based on ceramics, glass or mosaic, but with respect to the cost, convenience and efficiency of installation work, such a product has clear advantages.
Selection of design and decoration
When performing finishing work in the kitchen apron using laminated MDF panels.
Plates on the tabs are expensive and cause difficulties for their integration, but visually look like a wooden array. Such plates have a covering from a natural tree. Photo apron for kitchen from MDF clearly demonstrates the advantages of products made to the ceiling.
Finishing the entire kitchen space with MDF panels will help to make the kitchen more quiet and warm.
Material is flammable. If you need to organize safety from fire, you can close the apron from the side of the cooktop with a glass panel.
You need to create an easy-to-care solution, then it is rational to use glossy or matte MDF panels. Embossed panels have an attractive appearance.
Light MDF plates optimally decorate any kitchen space. Thanks to the integration of white solutions, a visual increase in space will occur. The dark surface looks very nice, but any dirt on it will be obvious.
Bright colors and photo printing are appropriate for a neutral interior design. Do not overload the design. You need to achieve a balance between calm white or beige facades and bright accents.
Expressive colors of the kitchen unit, complemented by a colored facade, optimally complement MDF with neutral images. The apron should be in harmony with the design of the floor.
Kitchen apron with photo printing
The beautiful apron from MDF on which the photo printing is applied, differs in the low price. Selecting panels with images, you should consider how it is applied. There are three options for the application of drawings:
Printing an image on the surface of the film and gluing it onto the plate is a cheap and not practical solution.
Drawing an image on an acrylic surface and varnishing it is the best value for money.
High-quality glossy drawing pattern. This technology is used hot cladding. Such a solution is expensive, but its operational parameters are the highest.
Choosing the best MDF panels
Practical apron from MDF can be made of quality materials. Good MDF panels are E1 emission class. The plastic coating will help to prolong the operational life of MDF. When selecting MDF it is important not to confuse this material with analogues of particle board and HDF.
The distinctive feature is thickness. A standard chipboard board is more than 0.5 cm thick, and the HDF panel is 3 mm thick.
Considering the question of how to make an apron for the kitchen of MDF, you need to decide on the amount of necessary materials and their sizes. MDF stove may have different dimensions. The height of the product is 60-61 cm, but the length differs significantly. Differences in product thickness are also available.
Designers recommend plates with a thickness of 4 mm. A spacious and beautiful kitchen apron of such plates does not take much space. In small kitchen areas integrate one three-meter stove.
This solution is beneficial to complement the design of wood marble or concrete. In the case of plates with photo printing, you need to fit the image, so more materials will be needed.
Features of the installation work
When performing kitchen planning, one should take into account - the integration of conventional MDF boards can cause the formation of an empty space between the edge of the apron and the hood.
It is recommended to finish the panels to the level of cabinets or ceiling. The simplest solution would be painting or wallpapering.
You can fix the apron on the crates of the beam. The solution is convenient and eliminates the need for leveling the walls. It is recommended to leave a gap between the apron and the wall. In this case, normal ventilation is guaranteed.
Also it is necessary to treat the panel with antiseptic. With the help of MDF panels, you can hide the wiring of the outer type. In this case, the wires must be insulated using flexible corrugated PVC pipes. Before mounting the apron, holes should be formed for the sockets.
Installation of MDF apron is performed by the so-called "ears". Ears are applied to the inner surface of the slab, after which the slab is hung on the wall surface. At the same time you need a perfectly flat wall.
You can fasten the apron with construction clips. It is also possible to install MDF boards using a profile system into which the panel is inserted. It is extremely rare when installing the apron used screws and mounting glue. Liquid nails are not recommended.
Following the simple recommendations of specialists, unique and multifunctional solutions are created. Apron from MDF plates looks very stylish and favorably complements any interior.
Photo apron from MDF to the kitchen