Sink without faucet hole
- The form
- Manufacturing materials
- Overflow system
- Advantages and disadvantages
- Manufacturers and popular models
Making repairs in the bathroom, I want to create not only a fashionable and beautiful design, but also to provide maximum comfort and versatility. One of the main interior items here is the sink. Currently, models without a hole for a mixer are becoming increasingly popular.
They are made perfectly smooth and smooth, which creates a shade of luxury in the interior. At the same time, they are very convenient to use and are an environmentally friendly object, which is created using high technologies.
From the outside it seems that the sink without a hole for the mixer has a simple form. In such a shell there is nothing unnecessary, everything is minimal and concise. However, if you look closely, it becomes clear that in fact this species has a very complex structure. In some models there is only a hole for draining, however, and it is often carefully masked.
By appointment, two types of shells are distinguished. The first are sinks that are designed for installation in the kitchen. The second type will be washbasins that are installed in the bathrooms. There are also several types of sinks, which differ in the method of installation.
The first view is the shell overhead. Its advantage is the presence of a small side that covers the joint with the tabletop from splashes and dirt. This sink will increase the functionality in the room, as there will be free space on the table or cabinet around it.
The second type is a mortise shell. Here, the sink will be installed under the countertop, that is, it will be a continuation of the cabinet. The advantage of such a shell is the absence of joints. However, it is best to choose a worktop from materials that are protected from moisture, such as stone, since supervision of the condition of the sealing parts under the gander and on the crane rods is necessary. This view is best suited to enhance functionality in small spaces.
The third type is a sink with a pedestal. In this category, the whole model of glass is considered the most ideal. It is quite sophisticated and fits perfectly to any interior. Also, this model is the most hygienic due to the lack of seams, where dirt could accumulate. However, the glass sink requires careful and careful care.
Sinks without a hole for the mixer are created from a variety of materials. They are glass, ceramic or earthenware. They can also consist of natural or artificial stone, expanded clay. The most popular choice are marble models.
Sinks from ceramics can be chosen for any conceived interior. They can be with a glossy or matte texture. White and black colors are usually the most popular, but you can also find shells of other colors if you wish.
Interesting models of sinks without holes for the mixer can be found from alyuite. It is soft and velvet to the touch material. Despite these qualities, the care of such a sink is very simple. Usually the set comes with special wipes for cleaning.
An unusual choice would be a washbasin made of concrete. It is unusual in that when it gets wet it becomes dark, and then gradually brightens when it dries. And this model does not require special care.
Choosing shell material, you should pay attention to its value. The most budgetary option are sinks made from earthenware. However, these models require frequent maintenance, because of their porous structure, they quickly become contaminated.
Products made of natural stone look very presentable, but they are very expensive.
Glass models will require the most accurate handling. Most often to them pick wooden or metal pedestals.
Ceramic, cast-iron and stone sinks due to its weight mounted on top. Their edges are treated with foam rubber tape or a sealing agent. On the wall, the product can be mounted on a hanging table top or cabinet cover, which must be mounted on brackets or anchors. When mounting without using a base, it is necessary that the mixer be installed on the wall with a seal in the connecting pipes.
Of great importance here is also the thickness of the rear wall of the washbasin, since it must bear a large load. And it should be high enough so that during pressure on the edge of the sink there is practically no separation from the wall. The shells are fastened at an average height of 85 cm, but if a child lives in the house, then you can make it a little lower - at a height of about 75 cm.
If you do not want to install the mixer on the wall, floor or pedestal, then you can make a hole for it yourself in the ceramic washbasin. First you need to study the product from all sides, as some manufacturers mark the places where it is possible to make a hole.
Having decided on the place, it is necessary to prepare the necessary tools:
- a device for spraying liquids;
- pobedit drill.
Although ceramics and is considered a strong material, it is still necessary to carry out the procedure very carefully, so as not to damage the product from it. Most often complete with a sink comes instruction with a detailed description of the process. However, it is worth considering that when working with a hammer requires maximum caution, since it is very easy for them to bring the sink to an unsuitable state. You can also create a hole for the mixer with a drill. To do this, it is simply necessary to drill the sink in the intended place and continuously cool the drill with water during operation.
Although the development of new types of water overflow systems from the washbasin is ongoing, at the moment there are only three types. The first implies that when the liquid is filled to the intended mark, the drain hole will open on its own.
In the next version, the built-in automatic tubular pump is installed in the form of a curved tube with bends of different lengths. It must be connected to a drain pipe. When the drain hole is closed, water will fill the sink and gradually rise in the pump. When a certain volume is reached, excess liquid will overflow through the partition and drain into the sewer. Well, the easiest option is an unlocked drain valve, with which there is no need to worry about overflow.
Advantages and disadvantages
Sinks that do not have a hole for the mixer, have both positive and negative signs. The main disadvantage of such sinks is the inconvenience of installation, since for this it is necessary to open the walls.
However, the advantages of these models are much greater. Firstly, during use, the liquid does not flow under the mixer, which prevents wear of the sealing parts between the sink and the spout.
Secondly, they are more hygienic, since in ordinary models pollution accumulates between the mixer and the washbasin. Thirdly, this design will help to create a modern and luxurious atmosphere in the room. Also, when choosing such a model of a sink, it will not be necessary to measure the diameter of the space in advance for the installation of the mixer, and it will be possible to arrange the water adjustment structure at any convenient place and at the required height.
Due to the huge choice of models, you can not limit the flight of fancy to create a unique bathroom design.
Manufacturers and popular models
Stylish models of sinks in which the mixer is installed separately can be found in any specialized department. The most popular choice is the mounted structure Rosa "Oka", which has a long service life. The country of origin of this model is Russia.
However, most often sinks without a hole for the mixer are manufactured in Europe. Companies work with designers to create new modern and functional models. When choosing a sink, you should pay attention to the fact that the product is branded, as sometimes there are fake copies of poor quality. Tulip sinks and washbasins with pedestals are also very popular models.
Currently, buyers choose narrow models to make the room more spacious, or large-sized products to protect the room from splashes.
Do not forget that to install the sink without a hole under the faucet is better to consult a specialist.
To learn how to drill a hole in a stone sink, see the following video.