How to hide the pipes in the bathroom - photos of the best
When repairing a bathroom, there is often the question of how to hide the sewer and water pipes with your own hands.

At the same time, you should not forget that you need to leave free access to them, so that in case of a breakthrough, it would be easy for you to get to them.

Before you think about how to hide the pipes in the bathroom, you need to draw a plan of how the plumbing fixtures will be located.

Drawing a plan on paper, you need to carefully consider the scale.
But you can take it easier, and right on the wall mark the conduction of the pipeline.
But do not forget that in houses with a large number of apartments, the whole system is interconnected, and if problems arise with the pipeline, they can affect not only you, but also your neighbors.

While masking the pipes in the bathroom, try to stretch them in the shortest way, avoiding various bends and turns.

It is worth taking into account some points when masking the pipeline in the bathroom:
- pipe diameter;
- waterproofing;
- the possibility of crushing walls;
- material and its thickness from which additional partitions are made;
- how the fixture is located;
- floor screed thickness.

Disguise plumbing
In order that the bathroom would go more free and aesthetics was given to this room, most people have a question about how to hide the pipeline in the bathroom.

The site contains photos of how to hide the pipes in the bathroom in various ways.
Lay the pipe in the floor screed. With this method, pipes are laid in the shortest possible way, without using crushing walls.

But you should pay attention, if you also provide a heated floor, then the laying of pipes should be carried out around the perimeter of the bathroom.

ATTENTION!!! To use hot water, it is possible only after complete freezing of the screed!
Before you hide the pipes in the bathroom wall for drywall, make sure that the material is secure, so that you do not have to disassemble the wall after the repair is completed.

This option is most suitable in the apartments of new buildings, as there you build your own layout.

And in small Khrushchev, drywall will take the space, but it is already not large.
This is due to the fact that the structure consists of profiles to which drywall is fastened, and a tile is laid on top.

It is also worth not to forget that before you hide the pipes in the bathroom under the tile, you must leave a space through which you can check the condition of the pipes, and in case of an accident to prevent it.

- Luxury bathrooms - we decorate stylishly and wisely (90 photo variants)
- Purple bathroom - make out a stylish design for the mind! 69 photos of bright ideas.
- Bathroom from IKEA - a review of the best new furniture (90 photos)
Not a good option to hide pipes in the wall.
Since they will have to be crushed, and the wall may crack the entire apartment building.

But if you still decided, before you hide the pipes in the bathroom in the wall, first of all, you need to draw a plan for the passage of the pipeline.

Next, grinder or grinder with a diamond disk saw through two slots parallel to each other, equal to the width of the pipes and hoses, the middle, so that the groove would be better to gouge with a perforator, it will still shorten your time.

If you do not have it, you can gouge with a chisel and a hammer, but it will take longer. Once the grooves are ready, you can lay the pipes and hoses, overlap the top with plaster.

It is worth remembering to leave the inspection hatches so that, if necessary, you can get to the pipes.
- Painted bathroom - an overview of how to paint a bathroom (77 photos)
- Bathroom hood - which one to choose? Review of popular models +80 photos
- Orange bathroom - 75 best photo ideas of bright color combination

Not to open a decorative covering on a bathroom, stack pipes of excellent quality.

Roller shutters will help you to provide trouble free access to the pipeline and an excellent bathroom interior.

You can also equip the shelves behind them, which will be stored household chemicals.

Thus, you answer the question: "How to hide the pipes in the bathroom without mounting them in the wall and floors?"
But it is worth considering that the design is simple and not very strong, it is easy to deform.

- Beige bathroom: calm and stylish colors in the design + 76 photo design ideas
- Bulk floor in a bathroom - installation taking into account features of the room (92 photos + video)
- Bathroom decor - 82 photos of original decorating ideas and stylish design
Hiding pipes with furniture and various decorations is also one of the most common ways.

Shelves and cabinets will help mask the pipes in the bathroom. When installing cabinets in the bathroom, you only need to cut the back wall.

The surface of the furniture where the pipes pass is better treated with waterproof material, but it’s worth getting ready that it takes time and a lot of money.

It is also possible to decorate pipes with artificial lianas, foam moldings and everything that is enough for your imagination.

It should be noted that access to threaded connections, fittings, valves and counters should be unhindered.

Photos of how to hide pipes in the bathroom






































